Wood Talk | Woodworking

• Well, So Much for Quitting | WoodTalk 581

  It’s show #581 - On today’s show, we’re talking about…making stains suck less, cutting angled tenons, and what to do with all that ash? PLUS we have a new sponsor of the show!Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.What's on the BenchMarc is building with epoxy!Shannon is finishing with a ketchup packet.Matt is finishing up kitchen stuff and still sawing stuff too.KickbackJoe reaches back out to us to say his hand plane issues were because of the "friggin' frog" in the wrong place.Andy wants to tell us about a new modeling software at Layout.computer that was designed for chair makers but has now added a casework component too.Brandon offers the advice of putting an air filter outboard of the intake on his dehumidifier and what a difference it has made.Andrew calls in to share his surgeon father's advice about being cut with a dull tool or sharp tool, spoiler alert, "flappy bits" is a technical term.New Sponsor - WoodcraftWe reminisce about our early Woodcraft store experiences and the classes we have taken there. We are thrilled to be a part of that journey for other woodworkers and look forward to working with Woodcraft.Listener QuestionsDavid wants to know why stains suck so much and we try to tell him they don't...and fail. Marc suggests making a blotch control to help with stain absorption.Steve looks for advice on making angled tenons for a chair using power tools. Angled mortise or angled tenon?Paul has several Ash logs that were killed by the Ash Borer and asks for advice on what to do with them.Steve is taking a trip to Japan and wants to know some woodworking related stuff to see. We don't know but want to know so are asking the audience for advice. Write/call in and tell us your suggestions.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

  --------  

  1:19:05
• Woodworking Blue Balls | Wood Talk 580

  Hand tool frustration, feeling guilty about shop time, chunks of crotch, shop dehumidification, and glamor shots Hosted on Acast. See acast.com/privacy for more information.

  --------  

  1:23:28
• Pottery Wheel Hooch | Wood Talk 579

  On today’s show, we’re talking about first aid in the shop, free modeling software, wood in movies, which handsaw to buy, keeping those tootsies comfortable in the shop, finding the center of an edge, and sanding safely.Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.What's on the BenchMarc has woodworkers invade his shop.Shannon is building a coat rack disregarding wood movement.Matt moved into his kitchen and is now a professional chef.KickbackZack listened to all the shows and submits his comments through history all at once.Bram comments that made jinxed himself when he said he would never want to have to cut enough dovetails to fill and entire kitchen.Tom sums up our host's personalities perfectly.Listener QuestionsAntonio's feet hurt and he wants advice for his shop.Alex has a new ROS and is making a lot of dust. What is the best safety gear for sanding dust?Kevin wants to know when Shannon will make a Guild project.Josh asks how to best find the center of an edge.Jonathan cut his finger badly and it has him thinking about his first aid and emergency response in his shop.Eric can't use the free version of SketchUp any longer and asks about free 3D modeling software options.Von Welch was listening to the Flop House podcast and he wanted to know what movies we think of when it comes to wood and/or woodworking in movies.Antonio wants an opinion on dovetail saws and a saw for resawing.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

  --------  

  1:31:48
• Black Friday is Dead | Wood Talk 578

  On today’s show, we’re talking about things to think about when woodworking in the desert, non-digital information sources, cutting large cookies without the big tools, and buying your first dust collectorSponsored by You: https://patreon.com/woodtalkWhat's on the Bench+Marc is making plywood workbenches and hating his life+Shannon is crafting a craft beer Christmas+Matt is using drawer slides and wishes he wasn'tKickbackSo many of you wrote in to say how much the burnout episode spoke to you. From those dealing with the loss of a parent to those struggling to find time for woodworking. Burnout is a very real issue and we are so thankful for all of you who commented and took the time to write to us about your own personal experiences with it.Listener Questions+Mike lives in the AZ desert and wonders how his dry climate changes how he woodworks and what he needs to consider when he builds projects that end up in much more humid climates.+Lucas inherited a shop that is already plumbed for dust collection and asks about buying his first dust collector.+Dane has a big hunk of burl that he resawed to make a chair seat. It took him a long time and left him exhausted and asks how he could improve other than buying a different tool.+Jeremy spends enough time in front of a computer and asks how we feel about woodworking magazines as a way to get more woodworking knowledge.Ask Us a Question: https://woodtalkshow.com/questions/Finally you can find us individually at @mattcremona, @woodwhisperer, and @renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

  --------  

  59:21
• Marc Needs a David Marks Injection | Wood Talk 577

  We’re talking about… BURNOUT!!!, a tight riving knife, making big under-bevels, buying bulk lumber, and uneven table legs. Hosted on Acast. See acast.com/privacy for more information.

  --------  

  59:41

Plus de podcasts Loisirs

Podcasts tendance de Loisirs

À propos de Wood Talk | Woodworking